Notesale: Turn your study into money

Document Preview

Extracts from the notes are below, to see the PDF you'll receive please use the links above

---

Pre-Delivery Service
Purpose of Pre-Delivery Service
PDS (Pre- Delivery Service) is performed by the
dealer before a new vehicle is delivered to the
customer in order to ensure that it is in optimal
condition, and that the customer can operate it
immediately upon taking delivery
...
Verifying the condition of the vehicle
...
Restoring the vehicle to operating condition
...
Inspecting the functions of the vehicle
...

PDI (Pre- Delivery Inspection): The distributor
performs the new car quality inspection
...
Various problems may occur during
transport, such as physical damage
...


(1/1)

Restoring the Vehicle
Restoring the Vehicle
To prevent problems during transport, various
protective measures are taken with the vehicle
before it leaves the factory
...
If the vehicle cannot be restored to operating
condition, the vehicle might not be able to function
properly, or the unrestored portion could lead to an
unforeseen accident
...

Removing body protective film
(1/10)

-1-

Installing of fuses and short pins
Before starting the inspection, install the dome light
fuse, radio fuse, or short pins
...

HINT:
• The removed fuses are attached to the inside of
the cover of the respective relay block, which is
located in the engine compartment
...

Relay block
Fuse or short pin
(2/10)

Installing factory-loaded parts
The factory-loaded parts are packaged individually
to prevent damage during transport
...

For example:
Outside rearview mirrors
Spare wheel carrier bracket
Snorkel
Front spoiler
Wheel caps and covers
(3/10)

Removing rust-preventive covers from brake
discs
Remove the rust-preventive covers that are
attached to the disc brakes
...

• A vehicle equipped with 4-wheel disc brakes has
the covers on all 4 wheels
...

• When removing the covers, make sure to use
your hands
...

Rust-preventive cover
Warning label
(4/10)

-2-

Installing rubber body plugs
Install the rubber body plugs into the torque box
holes
...

Rubber body plug

(5/10)

Removing front spring spacers
Remove the front spring spacers from the front
suspension coil springs
...

• Raise the vehicle on a jack or an auto lift to
remove the spacers
...

• Install the covers over the holes of the emergency
towing eyelets
...

• Place the removed emergency towing eyelet in
the tool bag
...

Emergency towing eyelet
Emergency towing eyelet hole cover
Tool bag
(7/10)

-3-

Adjusting tire air pressure
Adjust the tires to the appropriate air pressure
...
At this pressure, the ride will be
uncomfortable and the tires could wear unevenly
...


(8/10)

Removing unnecessary labels, tags, stickers
and covers
...

NOTICE:
Do not use a sharp object such as a knife to
remove the protective covers because it could
damage the trims and the seats
...
Before peeling off the protective film, wash the
vehicle to prevent the painted surface from being
scratched with sand or dust that may have
accumulated during transport
...
Start peeling off the protective film from the
corners (circled in red in the diagram on the left)
...

(2) Pull off the film quickly in a horizontal direction
...

• Use only your hands to peel off the protective film
...
After removing the protective film, check the
vehicle body for any adhesive residues or bulges
on the paint surface
...
This
operation is indispensable for delivering the vehicle
in a safely operable condition with which the
customer can be satisfied
...

Walk-around inspection
Inspect the state and operation of the vehicle
by checking the lights operation, etc
...

Under vehicle
Inspect under the vehicle by checking the
leaking of the engine oil, etc
...

Final inspection
Inspect finally by removing unnecessary labels
or cleaning the vehicle, etc
...


True or False

Question

1

If the vehicle cannot be restored to its operating condition during
PDS, the vehicle might be unable to function properly, or the
unrestored portion could lead to an unforeseen accident
...


j
k
l
m
j
k
l
m
n True n False

3

Factory-loaded parts are removed for transport because they can be
either installed or not installed
...


j
k
l
m
j
k
l
m
n True n False

5

After removing the emergency towing eyelets, they can be disposed
of because they are no longer necessary
...
The conditions of a vehicle are verified during PDS before it is shipped by the manufacturer
...
To prevent problems during transport, various protective measures are taken before the vehicle
leaves the factory
...

j
k
l
m
n 3
...

j
k
l
m
n 4
...

Question-3
Which one of the following statements is true about restoring a vehicle?

j
k
l
m
n 1
...

j
k
l
m
n 2
...

j
k
l
m
n 3
...

j
k
l
m
n 4
...

Question-4
From the word group indicated below, select the words that correspond to the operations illustrated below
...


2
...


4

---