Notesale: Turn your study into money

Document Preview

Extracts from the notes are below, to see the PDF you'll receive please use the links above

---

Plan Windmill
Materials Needed:
PVC Pipes (2)
Moter (2)
LED Light 10 mm (2)
90 Degree PVC Pipe (2)
PVC connecter for 3 sides (1)
Wooden Sticks (6)
LED Holder (2) [Made of plastic]
Cork (2)
CD's (6)
Total Price =
Tools needed to create the product: 

- Drill
- Glue
- Electric wire
The Steps: 



To make the base of the windmill you will need to follow these following steps: 

Step 1 - Get the PVC pipe
Step 2 - Get the PVC connecter for 3 sides and put that on the top of the PVC pipe
Step 3 - Get the second PVC pipe and cut the pipe in half
Step 4 - When you have cut the PVC in half you want to put each half on a different side of the
PVC Connecter for 3 sides
...

Do the same on the other side
...





The Proppellors
Now I will explain you how to make the propellors for the windmill
...

Step 5 - Wait for 10 minutes until the glue has
Step 6 - While it is drying, you can get the 2 cork's and make 3 holes in the equally apart from each
other
...

Step 9 - Now get the glue and glue it so that it will stay in it's possition
Step 10 - Now grabe the electric wire and the moters
Step 11 - Attach the electric wire to the moters
Step 12 - Now add the corks to the moters front side
Step 13 - Grabe the 2 LED light and the 2 LED holder
Step 14 - Add the LED lights to the holders
Step 15 - Attach the LED light of the other side of the electric wire
Step 16 - Put the LED light inside of the holes we made earlier



---