Search for notes by fellow students, in your own course and all over the country.
Browse our notes for titles which look like what you need, you can preview any of the notes via a sample of the contents. After you're happy these are the notes you're after simply pop them into your shopping cart.
Title: choose your model door or windows
Description: pictures and mesures of a lot models of home doors and windows
Description: pictures and mesures of a lot models of home doors and windows
Document Preview
Extracts from the notes are below, to see the PDF you'll receive please use the links above
Interior Door
Catalog
Corvado 8´0´´
®
We’re door people
...
com
CraftMaster offers a complete selection of
interior doors to fit any home
...
Molded doors are available with
either a wood grain texture or smooth surface in
nine panel designs
...
Carrara 6´8´´
• Covered by a 5-year warranty
...
Available in a
range of heights and widths, CraftMaster wood
doors are available in 1-3/8” thickness and in a
variety of wood species and panel designs
...
6-Panel Pine 6´8´´
French Doors
French doors bring more options for interior
spaces
...
Available in 1-Lite,10-Lite, and15-Lite doors
...
CraftMaster Interior Door Catalog
Product
Page
CraftMaster Interior Door Catalog Introduction
4
Molded Doors
Molded Doors Introduction
Colonist
Colonist Commercial
Carolina
Colonist Pre-Stained / Pre-Finished
including: CraftMaster Natural, CraftMaster Harvest
CraftMaster Mesa, CraftMaster Canyon, Colonist Pre-Finished White
Carrara
Corvado
Caiman
Cremona
Coventry
Carmelle and Carmelle Pre-Finished White
Clermont
Classique and Classique Pre-Finished White
Coventry
4
5
5
5
6
7
7
7
7
7
8
8
8
8
Molded Doors — Specialty Products
Carrara Cellini
Caiman Cellini
Corvado Cellini
CraftMaster Reflection Series
9
9
9
9
Wood Doors
Wood Doors Introduction
Pine Doors
Flush Doors
Pine Bifold Doors
Radiata Bifold Doors
Louver Pine Bifold Doors
Flush Bifold Doors
Café Doors
Louver Passage Doors
Mirror Doors and Bifolds
10
11
11
12
12
12
12
13
13
13
French Doors
10-Lite French Doors
15-Lite French Doors
1-Lite French Doors
14
14
14
Wood Door Warranty
15
Molded Door Warranty
17
CMI Company Information
18
3
CraftMaster Molded Doors
Made from molded high-density fiberboard, CraftMaster
doors resist shrinking, swelling, cracking and joint separation
...
For full
details, visit craftmasterdoors
...
• All doors are available primed and ready to paint
...
Colonist®
Caiman®
Carmelle®
Carrara®
Coventry®
Clermont®
Classique®
Cremona®
• CraftMaster doors can be specified in 1 3/8˝ and 1 3/4˝
thicknesses
...
• CraftMaster doors are covered by a 5-year
limited warranty
...
Optional
matching facings, front and back, are available for all bifold
constructions
...
• CraftMaster doors can be specified for either hollow or
solid core construction and with either finger-joint or MDF
stiles and rails
...
Instead, by-products from sawmill
operations are used to convert wood chip waste into
designs of true beauty
...
A
CraftMaster door facing is made from an engineered wood
fiber mat that is molded under intense heat and pressure
into an 1/8” (3
...
The result assures consistent quality from door to door,
room to room, and home to home
...
4
Reflection Series
Mirror Door
We’re door people
...
• Available in 6´8˝, 7´0˝ and 8´0˝ passage and
bifold sizes
...
• Fits most standard commercial hardware,
including door closers, exit devices, kick plates,
and card and mortise locks
...
• Available for 3´0˝ openings in 6´8˝ and 7´0˝
heights
...
• Available in standard 6´8˝ passage and bifold sizes
...
5
Colonist design is also available in
four Pre-Stained colors and in Pre-Finished White
CraftMaster Pre-Stained and
Pre-Finished White
NOTE: Due to the use of a protective
topcoat sealer, Pre-Stained and Pre-Finished
White doors cannot be repainted without
fully removing the topcoat sealer
...
• Available in standard 6´8˝ passage and bifold sizes
...
Smooth finish, clean designs
Carrara®
Smooth finish
• Austere yet welcoming, this uncluttered
design has limitless appeal
...
Corvado™
Smooth finish
• The warmth and richness of a traditional
plank door with a distinctive groove and
modified sticking pattern for added detail
...
S
...
• Available in 6´8˝, 7´0˝ and 8´0˝ passage and
bifold sizes
...
Caiman®
Smooth finish
• A two-panel, true arch design that’s the
picture of elegant simplicity
...
Cremona®
Coventry®
Smooth finish
Smooth finish
• Bold, sleek, stylish, this
door brings chic to any
room
...
• Available in 6´8˝, 7´0˝
and 8´0˝ passage and
bifold sizes
...
7
Rich texture, in a variety of designs
Carmelle®
Oak wood grain texture
• Arched tops lend a
storybook flair to this
four-panel classic
...
Carmelle®
Pre-Finished
White
Oak wood grain texture
• Available in standard
6´8˝ passage and
bifold sizes
...
• Available in standard 6’8” passage
and bifold sizes
...
• Available in standard 6’8” passage and
bifold sizes
...
• Available in standard 6´8˝
passage and bifold sizes
...
We’re door people
...
• The molding, perfectly mated with CraftMaster raised
panel designs, can be affixed to the door for the ultimate in
flexibility
...
• Available in 6´8˝, 7´0˝ and 8´0˝ passage
and bifold sizes
...
• Available in 6´8˝, 7´0˝ and 8´0˝ passage
and bifold sizes
...
Corvado™ Cellini (Corvado design shown on page 7)
Smooth finish
• Two-panel, square top plank design
...
CraftMaster®
Reflections Series
Oak wood grain texture
• The only door available with one mirrored side and a choice of
a wide range of panel designs on the other
...
• Unique design allows you to save space without sacrificing style,
adding convenience and value to any home
...
9
CraftMaster Wood Doors
Warmth of Solid Wood
CraftMaster wood doors are available in a range
of designs and wood species
...
6-Panel
4-Panel
Flush
Mirror
Wood doors are constructed using hardwood
dowels and glue, with high quality Stanley
hardware (Stanley BF 30 - 2400 Series)
...
Size Options
Available in a range of widths in 6´8˝ height
...
15-Lite
also available in
1-Lite, or 10-Lite
Special Order
The designs below are available in a range of wood species, including: Red Alder, Douglas Fir, Knotty Pine, Northern Red Oak,
Ponderosa Pine, and Poplar
...
100
102
103
107
109
10
802
806
822
20 PLK
106 FP
107 FP
733
120 PLK
820 PLK
20 FP
FP
102 FP
103
4103 T
820 PLK
We’re door people
...
4-Panel Pine Doors
Radiata Pine
• Available in standard 6´8˝ passage sizes
...
• Flush doors available in Lauan,
Birch, Oak, Hardboard, or Primed
• Available in 6´8˝, 7´0˝ and 8´0˝
passage sizes
...
• Available in standard 6´8˝ bifold sizes
...
• Available in standard 6´8˝ bifold sizes
...
• Available in standard 6´8˝ passage and
bifold sizes
...
• Available in standard 6´8˝ passage and
bifold sizes
...
CraftMaster Wood Café, Louver and Mirror Doors
Café Doors
Solid pine
• Available in louver or raised
panel designs
...
Shown Left: Louvered design
Shown Right: Raised panel design
Louver Passage Doors
• Louver-over-panel, or louverover-louver style
...
Shown Left: Louver-over-panel
Shown Right: Louver-over-louver
Mirror Doors and Bifolds
• Available in bifold or bypass
configurations
...
• Solid Pre-Finished steel frame
...
Shown Left: Bypass mirror doors
Shown Right: Bifold mirror doors
13
CraftMaster Wood French Doors
10-Lite French
Pine or Primed
• Available in 6´8˝, 7´0˝ and 8´0˝
passage sizes
...
Check with your door supplier
...
• Oak is available by special order
...
18-Lite*
*Available 8’0” only
1-Lite French
Pine or Primed
• Availabe in 6´8˝, 7´0˝ and 8´0˝
passage sizes
...
Check with your door supplier
...
CraftMaster Wood Interior Doors
2-Year Warranty
CraftMaster wood doors made by CraftMaster Manufacturing, Inc
...
Failure to follow these guidelines voids the warranty
...
liability of the Seller is expressly limited to replacement or repair of
the defects of the CraftMaster wood door, or refunding at its option
...
No purchaser shall be entitled to consequential damages as defined
in the Uniform Commercial Code
...
Normal characteristics of kiln dried wood include, but are not limited
to, minor swelling and shrinking of parts made from wood, raised
grain, minor pitch pockets, natural grain and color variations
...
FINISHING OPTIONS
You may choose from a wide variety of stain or paints to finish your
door
...
Warp in the plane of the door itself will be considered a defect only if
it exceeds one-quarter inch (1⁄4”) when measured as a deviation from
a straight edge
...
Improper hanging of the
CraftMaster wood door or unsquare door frames are not considered
to be defects
...
(Latex or water base primer may contribute to raised grain)
...
Be sure to evaluate
the condition your CraftMaster wood door will endure, such as direct
exposure to severe climates, before deciding on the specific finish to
use
...
Handling
• Do not walk on any door units
...
An extended warranty period is granted solely for seal failure on
insulated glass units (moisture between glass) for a period of ten (10)
years from the date of manufacture
...
Seller will not, under any circumstances, be liable for installation,
refinishing or painting
...
The glass warranty will be void if the product is not properly
installed according to Seller’s installation instructions contained herein,
or is used in or around swimming pools, saunas, sprinkler systems or
greenhouse enclosures; or if installed over 5,000 ft
...
No agent,
employee or representative of Seller has any authority to bind Seller
to any affirmation, representation or warranty concerning Seller’s
products, except as expressly stated herein
...
All implied
warranties of merchantability or fitness for a particular purpose are
hereby limited in duration to the two-year period stated herein
...
• Keep doors clean
...
• Doors should be conditioned to average prevailing relative
humidity of the locality before hanging
...
• Doors should be delivered to the building site only after
the concrete, plaster, stucco, sheetrock work and paint are
completely dry
...
Avoid sudden changes such as forced heat to dry out
a building
...
15
CraftMaster Wood Interior Doors
2-Year Warranty
Preparation for Finishing
• djust or align components if necessary before finishing
...
Be
careful not to damage the door
...
This is to remove fingerprints, handling
marks, and any raised grain and will help insure a more uniform
finish
...
Avoid using compressed air to blow off
door as moisture or oil in the air may cause spotting
...
• ll surfaces of the door must be properly finished
...
• hen staining, a wood conditioner may be used to help achieve
W
a more uniform finish
...
• ang door before finishing to avoid damaging the finished door
...
Finishing
1
...
Be sure to follow the wood conditioner
manufacturer’s instructions closely
...
For best performance, a minimum of two clear top coats
should be used over stains
...
aint Finish
P
Doors should be sealed with a good quality oil-base primer
followed by two top coats of a solvent-base or latex enamel
...
See
exterior and interior finishing recommendation for complete
instructions
...
Allow approximately 3⁄16” clearance
for swelling when the door is installed in fully dry conditions
...
• The CMI warranty is not valid for doors that have been trimmed
...
If you choose to trim the
ends of doors, you assume all liability
...
Care should be taken in cutting doors down in width
(maximum 1/8˝ each side) to avoid exposing engineered core
...
• aution must be used to avoid impairing the strength of the door
C
when fitting for locks
...
• se three hinges on doors up to 7’ in height and four hinges on
U
doors over 7’
...
• ambs and stops must be set square and plumb
...
Its finish will require periodic maintenance to keep
it looking great
...
Here are indicators that it is time for maintenance:
1
...
2
...
3
...
4
...
16
We’re door people
...
(CMI) door plants in Garland, TX, Ozark, AL, or Christiansburg, VA
...
Disclaimer of Implied Warranties & Limitations of Remedies
The limited warranties state the entire liability of CMI
...
No person is authorized to make any representation
or warranty on behalf of CMI except as expressly set forth above, and any
such statement shall not be binding on CMI
...
This warranty only applies to the original installation of the door
...
The foregoing disclaimer
of implied warranties shall not be applicable to sales subject to the
Magnuson-Moss warranty act, in which case the duration of any implied
warranties shall be the duration of the limited warranty or such shorter
duration as provided under applicable state law
...
Note: Trimming doors will void the warranty
...
CMI WILL NOT
PAY THE COSTS OF LABOR, INSTALLATION OR FINISHING
FOR ANY REPLACEMENT DOOR
...
Claims must be made in writing to CMI within 60 days of discovery of the
defect
...
, NW, Christiansburg, VA 24073
After receiving such notice, CMI must be given a reasonable opportunity to
inspect and verify the claim
...
2
...
4
...
Width, height, and thickness dimensions: +/- 1/16˝
...
Squareness (as measured by difference of diagonals): <= 1/8˝
...
Maximum warp of ¼”, unless storage, handling or finishing can be
shown to cause warp
...
Measuring the amount of warp present in a door shall be done by placing
a straight edge, taut wire, or string on the suspected concave face of the
door at any angle (i
...
horizontally, vertically, diagonally) with the door in its
installed position
...
4
...
Handling, Job Finishing and Installation
Instructions
1
...
If doors are
stored at job site for more than one week, all edges should be sealed
...
Handle with clean gloves and do not drag doors across one another or
across other surfaces
...
Store doors flat on a level surface in a dry, well ventilated building
...
4
...
They
should be conditioned to average prevailing relative humidity of the
locality before hanging
...
The utility or structural strength of the door must not be impaired in the
fitting of the door, the application of hardware, or cutting and altering the
door for lights, louvers, panels, or any other special details
...
Two hinges may be used for hollow core doors weighing less than 50 pounds
or 6´8˝ or less in height
...
All
doors 7´0˝ or greater require 4 hinges
...
7
...
Clean before applying sealer or finish
...
The Towanda
mill pioneered the development of Pre-Stained door
designs, and continues to be the only facility worldwide to
manufacture this product with this proprietary technology
...
5 acres under roof
• 273 acres of land
• 650+ facility employees
• Specially engineered manufacturing lines which
allow for production flexibility
• Manufactures products for use in U
...
, South
America, Asia, and Europe
• Pioneered the molded door design technology in
1974
• Developed the technology to manufacture PreStained doors
• Created the TEC™ process used to produce
MiraTEC and Extira
18
At the heart of all CMI products is a commitment to an
environmentally friendly manufacturing process
...
Instead, wood chips, which are the by-products
of sawmill operations, are broken down into fibers, and
then exposed to intense heat and pressure to create CMI
engineered wood products
...
VPP is a program established by OSHA to
recognize superior performance in the field of health and
safety
...
CraftMaster Door Manufacturing
CMI manufactures and markets a full line of
CraftMaster molded, wood and flush doors
...
S
...
©2007 CraftMaster
416 7/07
See our complete list of doors and sizes online at craftmasterdoors
...
800
...
2233
craftmasterdoors
...
craftmasterdoors
Title: choose your model door or windows
Description: pictures and mesures of a lot models of home doors and windows
Description: pictures and mesures of a lot models of home doors and windows